Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME

UNIROYAL VIBRALEASE F.E.********OBSOLETE******************

NFPA

PRODUCT USE

Release agent for polyurethane casting and allied industries.

SYNONYMS

"silicone release agent solution for polyurethanes"

Section 2 - HAZARDS IDENTIFICATION

CANADIAN WHMIS SYMBOLS

EMERGENCY OVERVIEW

RISK

Limited evidence of a carcinogenic effect.
Dangerous for the ozone layer.

POTENTIAL HEALTH EFFECTS

ACUTE HEALTH EFFECTS

SWALLOWED

  Although ingestion is not thought to produce harmful effects, the material may still be damaging to the health of the individual following ingestion, especially where pre-  existing organ (e.g. liver, kidney) damage is evident. Present definitions of harmful or toxic substances are generally based on doses producing mortality (death) rather than those producing morbidity (disease, ill-health). Gastrointestinal tract discomfort may produce nausea and vomiting. In an occupational setting however, ingestion of insignificant quantities is not thought to be cause for concern.  Ingestion may result in sore throat, abdominal pain, with central nervous system effects, headache, dizziness, drowsiness.  Considered an unlikely route of entry in commercial/industrial environments.  

EYE

  There is some evidence to suggest that this material can causeeye irritation and damage in some persons.  The vapor is irritating to the eyes and may cause smarting, pain and redness.  

SKIN

  Skin contact with the material may damage the health of the individual; systemic effects may result following absorption.  The material is not thought to be a skin irritant (as classified using animal models). Temporary discomfort, however, may result from prolonged dermal exposures. Good hygiene practice requires that exposure be kept to a minimum and that suitable gloves be used in an occupational setting.  The liquid may produce skin discomfort following prolonged contact. Defatting and/or drying of the skin may lead to dermatitis.  Toxic effects may result from skin absorption.  The material may cause skin irritation after prolonged or repeated exposure and may produce on contact skin redness, swelling, the production of vesicles, scaling and thickening of the skin.  

INHALED

  Inhalation may produce health damage*.  There is some evidence to suggest that this material, if inhaled, can irritate the throat and lungs of some persons.  Prolonged exposure may cause headache, nausea and ultimately loss ofconsciousness.  Inhalation hazard is increased at higher temperatures.  

CHRONIC HEALTH EFFECTS

  There has been concern that this material can cause cancer or mutations, but there is not enough data to make an assessment.  

  Principal routes of exposure are usually by inhalation of vapor and skin contact/absorption.  Prolonged or continuous skin contact with the liquid may cause defatting with drying, cracking, irritation and dermatitis following.  Acute effects from inhalation of high vapor concentrations may be chest and nasal irritation with coughing, sneezing, headache and even nausea.  If exposure to highly concentrated solvent atmosphere is prolonged this may lead to narcosis, unconsciousness, even coma and possible death.  Anesthetics and narcotic effects (with dulling of senses and odor fatigue) are a consequence of exposure to chlorinated solvents.  Individual response varies widely; odor may not be considered objectionable at levels which quickly induce central nervous system effects. High vapor concentrations may give a feeling of euphoria. This may result in reduced responses, followed by rapid onset of unconsciousness, possible respiratory arrest and death.  Chronic solvent inhalation exposures may result in nervous system impairment and liver and blood changes. [PATTYS].