WATTYL SIGMA PHENGUARD FINISH LEAD FREE COLOURS (PART A)
Flammability | 2 | |
Toxicity | 2 | |
Body Contact | 2 | |
Reactivity | 1 | |
Chronic | 2 | |
SCALE: Min/Nil=0 Low=1 Moderate=2 High=3 Extreme=4 |
Part of a two pack, high build, phenolic epoxy tank coating. Mix with corresponding Part B
in recommended ratios, then apply by brush or spray on various metal surfaces. The use of
a quantity of material in an unventilated or confined space may result in increased
exposure and an irritating atmosphere developing.Before starting consider control of
exposure by mechanical ventilation.
"High build phenolic epoxy tank coating", "misspelling as phengard fenguard fengard"
Flammable.
Although ingestion is not thought to produce harmful effects, the material may still be damaging to the health of the individual following ingestion, especially where pre- existing organ (e.g. liver, kidney) damage is evident. Present definitions of harmful or toxic substances are generally based on doses producing mortality (death) rather than those producing morbidity (disease, ill-health). Gastrointestinal tract discomfort may produce nausea and vomiting. In an occupational setting however, ingestion of insignificant quantities is not thought to be cause for concern. Considered an unlikely route of entry in commercial/industrial environments. The liquid may produce gastrointestinal discomfort and may be harmful if swallowed. Ingestion may result in nausea, pain and vomiting. Vomit entering the lungs by aspiration may cause potentially lethal chemical pneumonitis.
Although the material is not thought to be an irritant, direct contact with the eye may produce transient discomfort characterized by tearing or conjunctival redness (as with windburn).
The material is not thought to produce adverse health effects or skin irritation following contact (as classified using animal models). Nevertheless, good hygiene practice requires that exposure be kept to a minimum and that suitable gloves be used in an occupational setting. Epoxy materials may cause allergic and/or contact dermatitis responses, which may occur on exposure or may become apparent only after repeated exposures. Sensitization is possible. Photoallergic dermatitis may result from contact with the material. This type of response can be elicited only in individuals who have been previously allergically sensitized to the chemical agent and appropriate radiation. Photoallergic dermatitis presents, clinically, as an eczematous dermatitis in sun-exposed areas. Sensitization may result in allergic dermatitis responses includingrash, itching, hives or swelling of extremities. The material may accentuate any pre-existing dermatitis condition. Sensitization reactions may appear suddenly after repeatedsymptom free exposures. Bare unprotected skin should not be exposed to this material.
Inhalation may produce health damage*. The material is not thought to produce respiratory irritation (as classified using animal models). Nevertheless inhalation of the material, especially for prolonged periods, may produce respiratory discomfort and occasionally, distress. Inhalation hazard is increased at higher temperatures. Inhalation of high concentrations of gas/vapor causes lung irritation with coughing and nausea, central nervous depression with headache and dizziness, slowing of reflexes, fatigue and inco-ordination. If exposure to highly concentrated solvent atmosphere is prolonged this may lead to narcosis, unconsciousness, even coma and possible death. Inhalation of vapor may aggravate a pre-existing respiratory condition such as asthma, bronchitis, emphysema.
There is some evidence that inhaling this product is more likely to cause a sensitization reaction in some persons compared to the general population.
Principal routes of exposure are usually by inhalation of vapor/spray mist and skin contact with the liquid. Chronic solvent inhalation exposures may result in nervous system impairment and liver and blood changes. [PATTYS]. Sensitization reactions may appear suddenly after repeatedsymptom free exposures. Sensitization may give severe responses to very low levels of exposure, i.e. hypersensitivity. Sensitized persons should not be allowed to work in situations where exposure may occur. Prolonged or continuous skin contact with the liquid may cause defatting with drying, cracking, irritation and dermatitis following.