Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME

VALSPAR MMS-425 REDUCER

NFPA

PRODUCT USE

Used to reduce the viscosity of epoxy primer coatings, particularly prior to application
by spraying. Also used for cleaning spray guns, lines. The use of a quantity of material
in an unventilated or confined space may result in increased exposure and an irritating
atmosphere developing.Before starting consider control of exposure by mechanical
ventilation.

SYNONYMS

"666 line epoxy primer cleaning solvent spraying thinner reducer"

Section 2 - HAZARDS IDENTIFICATION

CANADIAN WHMIS SYMBOLS

EMERGENCY OVERVIEW

RISK

May cause harm to the unborn child.
HARMFUL - May cause lung damage if swallowed.
Irritating to eyes and respiratory system.
Highly flammable.
Repeated exposure may cause skin dryness and cracking.
Vapors may cause dizziness or suffocation.

POTENTIAL HEALTH EFFECTS

ACUTE HEALTH EFFECTS

SWALLOWED

  Although ingestion is not thought to produce harmful effects, the material may still be damaging to the health of the individual following ingestion, especially where pre-  existing organ (e.g. liver, kidney) damage is evident. Present definitions of harmful or toxic substances are generally based on doses producing mortality (death) rather than those producing morbidity (disease, ill-health). Gastrointestinal tract discomfort may produce nausea and vomiting. In an occupational setting however, ingestion of insignificant quantities is not thought to be cause for concern.  Considered an unlikely route of entry in commercial/industrial environments.  Ingestion may result in nausea, pain, vomiting. Vomit entering the lungs by aspiration may cause potentially lethal chemical pneumonitis.  

EYE

  This material can cause eye irritation and damage in some persons.  

SKIN

  Skin contact with the material may damage the health of the individual; systemic effects may result following absorption.  The material is not thought to be a skin irritant (as classified using animal models). Temporary discomfort, however, may result from prolonged dermal exposures. Good hygiene practice requires that exposure be kept to a minimum and that suitable gloves be used in an occupational setting.  Toxic effects may result from skin absorption.  The material may accentuate any pre-existing dermatitis condition.  The material may cause skin irritation after prolonged or repeated exposure and may produce on contact skin redness, swelling, the production of vesicles, scaling and thickening of the skin.  

INHALED

  Inhalation may produce health damage*.  If inhaled, this material can irritate the throat andlungs of some persons.  Inhalation hazard is increased at higher temperatures.  Inhalation of high concentrations of gas/vapor causes lung irritation with coughing and nausea, central nervous depression with headache and dizziness, slowing of reflexes, fatigue and inco-ordination.  If exposure to highly concentrated solvent atmosphere is prolonged this may lead to narcosis, unconsciousness, even coma and possible death.  Inhalation of vapor may aggravate a pre-existing respiratory condition such as asthma, bronchitis, emphysema.  

CHRONIC HEALTH EFFECTS

  Ample evidence exists, from results in experimentation, that developmental disorders are directly caused by human exposure to the material.  

  Principal routes of exposure are usually by skin contact with the material and inhalation of vapor, inhalation of vapor/spray mist.  Prolonged or continuous skin contact with the liquid may cause defatting with drying, cracking, irritation and dermatitis following.  As with any chemical product, contact with unprotected bare skin; inhalation of vapor, mist or dust in work place atmosphere; or ingestion in any form, should be avoided by observing good occupational work practice.