JAQUES 730-35300 BOND NEUTRAL HARDENER
Flammability | 0 | |
Toxicity | 2 | |
Body Contact | 3 | |
Reactivity | 1 | |
Chronic | 3 | |
SCALE: Min/Nil=0 Low=1 Moderate=2 High=3 Extreme=4 |
A two- pack epoxy- amine, non- metallic polymeric compound for the internal backing
compound of managanese ore crushers. Requires that the two parts be mixed by hand or mixer
before use, in accordance with manufacturers directions. Mix only as much as is required.
Do not return the mixed material to the original containers.
"Amine Hardener", "Epoxy sealer hardener Jaques Bond", "Epoxy amine hardener Jaques Bond"
Causes burns.
Risk of serious damage to eyes.
May cause SENSITIZATION by skin contact.
May cause harm to the unborn child.
Harmful in contact with skin and if swallowed.
Harmful to aquatic organisms, may cause long- term adverse effects in the
aquatic environment.
Accidental ingestion of the material may be harmful; animal experiments indicate that ingestion of less than 150 gram may be fatal or may produce serious damage to the health of the individual. The material can produce chemical burns within the oral cavity and gastrointestinal tract following ingestion. Considered an unlikely route of entry in commercial/industrial environments.
The material can produce chemical burns to the eye following direct contact. Vapors or mists may be extremely irritating. If applied to the eyes, this material causes severe eye damage. The material may produce severe irritation to the eye causing pronounced inflammation. Repeated or prolonged exposure to irritants may produce conjunctivitis.
Skin contact with the material may be harmful; systemic effects may resultfollowing absorption. The material can produce chemical burns following direct contactwith the skin. Toxic effects may result from skin absorption. Sensitization may result in allergic dermatitis responses includingrash, itching, hives or swelling of extremities. The material may cause severe skin irritation after prolonged or repeated exposure and may produce on contact skin redness, swelling, the production of vesicles, scaling and thickening of the skin. Repeated exposures may produce severe ulceration.
If inhaled, this material can irritate the throat andlungs of some persons. Inhalation hazard is increased at higher temperatures. Respiratory sensitization may result in allergic/asthma like responses; from coughing and minor breathing difficulties to bronchitis with wheezing, gasping.
Skin contact with the material is more likely to cause a sensitization reaction in some persons compared to the general population. Ample evidence exists, from results in experimentation, that developmental disorders are directly caused by human exposure to the material.
Principal routes of exposure are usually by skin contact / absorption of the material and inhalation of vapor. Sensitization reactions may appear suddenly after repeatedsymptom free exposures. Sensitization may give severe responses to very low levels of exposure, i.e. hypersensitivity. Sensitized persons should not be allowed to work in situations where exposure may occur. As with any chemical product, contact with unprotected bare skin; inhalation of vapor, mist or dust in work place atmosphere; or ingestion in any form, should be avoided by observing good occupational work practice.