KCH KERAMCHEMIE KERANOL E PASTE B
|SCALE: Min/Nil=0 Low=1 Moderate=2 High=3 Extreme=4|
Curing agent or Part B of a 2 pack epoxy adhesive. DO NOT use until supplied directions
for use have been read and understood. Requires that the two parts be mixed by hand or
mixer before use, in accordance with manufacturers directions. Mix only as much as is
required. Do not return the mixed material to the original containers. The use of a
quantity of material in an unventilated or confined space may result in increased exposure
and an irritating atmosphere developing.Before starting consider control of exposure by
"epoxy resin hardener curing agent", Hartgummikitt
Risk of serious damage to eyes.
The material can produce chemical burns within the oral cavity and gastrointestinal tract following ingestion. Considered an unlikely route of entry in commercial/industrial environments. Ingestion may result in nausea, abdominal irritation, pain and vomiting.
The material can produce chemical burns to the eye following direct contact. Vapors or mists may be extremely irritating. If applied to the eyes, this material causes severe eye damage. Vapors of volatile amines irritate the eyes, causing excessive secretion of tears, inflammation of the conjunctiva and slight swelling of the cornea, resulting in "halos" around lights. This effect is temporary, lasting only for a few hours. However this condition can reduce the efficiency of undertaking skilled tasks, such as driving a car. Direct eye contact with liquid volatile amines may produce eye damage, permanent for the lighter species. The material may be irritating to the eye, with prolonged contact causing inflammation. Repeated or prolonged exposure to irritants may produce conjunctivitis.
The material can produce chemical burns following direct contactwith the skin. The material may accentuate any pre-existing dermatitis condition. The material may cause skin irritation after prolonged or repeated exposure and may produce on contact skin redness, swelling, the production of vesicles, scaling and thickening of the skin.
If inhaled, this material can irritate the throat andlungs of some persons. Inhalation of vapor may result in nausea, headache. Inhalation of vapor is more likely at higher than normal temperatures. Inhalation of vapor may aggravate a pre-existing respiratory condition such as asthma, bronchitis, emphysema. The material may produce respiratory tract irritation, and result in damage to the lung including reduced lung function.
Principal routes of exposure are usually by skin contact with the material and inhalation of vapor from the curing material. Prolonged or repeated skin contact may cause drying with cracking,irritation and possible dermatitis following. A few individuals may show allergic/sensitization responses which may be minor to severe. Exposure will aggravate this pre-existing condition and those with sensitization reactions should not be required to work where exposure may occur.