JUNOR INOX AEROSOL
Flammability | 1 | |
Toxicity | 1 | |
Body Contact | 2 | |
Reactivity | 0 | |
Chronic | 2 | |
SCALE: Min/Nil=0 Low=1 Moderate=2 High=3 Extreme=4 |
Application is by spray atomization from a hand held aerosol pack. Leaves a combustible
but non flammable penetrating lubricant film. Anti- moisture, anticorrosive, non-
conductive lubricant for preventative maintenance and repairs to electronic, electrical,
mechanical and marine equipment; also used on industrial and commercial machine
maintenance. NOTE: Authorised for use in Meat, Fish and Game Meat premises (MAF
Authorisation ref:15/4/13/103; DPI Aust. Type A approval- Export Control Act [Meat])
"aerosol penetrating oil Food-grade lubricant for incidental food contact", "Lubricant
Type A (Food Preparation Areas)"
Extremely flammable.
Risk of explosion if heated under confinement.
Although ingestion is not thought to produce harmful effects, the material may still be damaging to the health of the individual following ingestion, especially where pre- existing organ (e.g. liver, kidney) damage is evident. Present definitions of harmful or toxic substances are generally based on doses producing mortality (death) rather than those producing morbidity (disease, ill-health). Gastrointestinal tract discomfort may produce nausea and vomiting. In an occupational setting however, ingestion of insignificant quantities is not thought to be cause for concern. Overexposure is unlikely in this form. Considered an unlikely route of entry in commercial/industrial environments.
There is some evidence to suggest that this material can causeeye irritation and damage in some persons. The liquid may produce eye discomfort and is capable of causing temporary impairment of vision and/or transient eye inflammation, ulceration.
The material is not thought to produce adverse health effects or skin irritation following contact (as classified using animal models). Nevertheless, good hygiene practice requires that exposure be kept to a minimum and that suitable gloves be used in an occupational setting. The material may accentuate any pre-existing dermatitis condition.
The material is not thought to produce adverse health effects or irritation of the respiratory tract (as classified using animal models). Nevertheless, good hygiene practice requires that exposure be kept to a minimum and that suitable control measures be used in an occupational setting. Acute effects from inhalation of high vapor concentrations may be chest and nasal irritation with coughing, sneezing, headache and even nausea. Inhalation of vapor may aggravate a pre-existing respiratory condition such as asthma, bronchitis, emphysema. WARNING: Intentional misuse by concentrating/inhaling contents may be lethal.
Principal routes of exposure are usually by inhalation of vapor/spray mist and skin contact with the material. Oil may contact the skin or be inhaled. Extended exposure can lead to eczema, inflammation of hair follicles, pigmentation of the face and warts on the soles of the feet. There are few systemic effects, but prolonged exposure may lead to a higher incidence of lung scarring. WARNING: Aerosol containers may present pressure related hazards.